Aerial Tree Pruning (CS40) NPTC Unit: 302

Course Introduction

This Aerial Tree Pruning standard is about carrying out arboricultural pruning operations off ground in trees, carrying out reductions, crown-lifting, re-pollarding, thinning and crown cleaning. You will need to carry out a tree hazard evaluation and perform a ‘working at height’ assessment before starting this work. Access to the tree will be by recognised appropriate methods and in line with the above assessments. You will select suitable pruning tools relevant to the work to be carried out. Your work must meet the requirements of current legislation and current industry guidance. This standard is for those who prune trees off ground.

This course is for an advanced arborist chainsaw operator carrying out aerial tree pruning operations.

Pre -requisites 

• Unit 201 – Maintenance of the Chainsaw and Cutting System ( Formerly Cs30)
• Unit 201 – Cross-Cut Timber Using a Chainsaw (Formerly Cs30)
• Unit 202 – Fell and Process Trees up to 380mm (Formerly Cs31)
• Unit 203 – Access a Tree Using a Rope and Harness (Formerly Cs38)
• Unit 203 – Carry out Aerial Rescue Operations (Formerly Cs38)
• Unit 204 – Use of a chainsaw for free fall techniques (Formerly Cs39)

Awarded certificates of competence are widely recognised by both sector employers and the health & safety executive.

Our 2-day Aerial Tree Pruning training course is followed by a 1-day NPTC Assessment for unit 302 (Prev Cs40).  

PRICE £500 inc VAT   

Duration 2-days training +1-day NPTC Assessment – Unit 302

Candidates should use their own PPE – Personal Protective Equipment

Candidates bringing their own climbing equipment must provide evidence that the equipment to be used is fit for purpose and LOLER compliant. This means that it should have a unique identification and have been thoroughly examined by a competent person (LOLER Inspector) and the most current examination record/inspection report must be provided.  If the equipment is less than 6 months old please provide receipts. 

The training/assessment will not proceed without receipts or an in-date LOLER inspection report. 

Please call the office if you require a LOLER inspection report for your climbing equipment.  This cost is £70 +VAT per kit.